Maintenance inkjet printer

There's a saying that says "Better to prevent than to repair!!"
This adage is necessary in doing, because if your printer head is damaged, then the cost to repair the printer, almost the same as you buy a new printer.
So for that we should be able to treat us with the correct printer, Caring for the printer was easy to do, just needed a few minutes it every week, then your printer will avoid problems printer damage.

To avoid damage from the damage the printer:

    * Use printer regularly and periodically
      The most common problems we are hadapai poor print quality, there is a transverse white lines, color ink missing or not come out at all.
      With regular use of printer, so we still keep the ink flowing and wetting the surface of the nozzle.
      If we rarely use the printer, try at least once every 1 week we do a test print.
      Thus, it can prevent the ink is not dry on the surface of the nozzle.
      If you do not do this, then your printer head more quickly to a dead end, and this applies to all brands of inkjet printers.

      Tip: You can put little notes in front of your monitor to remind you to always do the printing of each week on a regular basis, both for black and other colors.
      for example: do print-rich web pages in color or small-sized photos rich colors.
      This method is more efficient than you do head cleaning on your printer.

    * Lethal (Shut Down) printer correctly
      Do not forget to turn off your printer when not in use, this method can also avoid the buntuan nozzle on your head.

      Important: turn off the printer with on / off button on your printer, do not turn off by unplugging your printer.
      Because if you turn off the on / off button, will activate the mechanical Capping will help to prevent drying nozzle.

    *
      Do not use paper, dirty or dusty
      If you print using the dusty paper, the mechanical drive roller of paper or paper will dirty faster.
      If this happens then your paper roller will wear out faster / damaged, the effect is not able to pull the printer paper.
      What if your paper roller dirty?
      You can clean with Dura Klin,'s how: Put Dura Klin HVS on plain paper, then print blank pages in the paper, do it 4-5 times, or use the buttons on the printer tray, to pull the paper out.

      Important: Do not use Vacuum Cleaner to clean the printer, can result in short / short circuit and burn it on board in the printer.
      Tip: If you live in dusty, use the printer cover so that your printer is more protected from dust, cover can be plastic or cloth.